3GPP LTE‐Assisted Wi‐Fi‐Direct: Trial Implementation of Live D2D Technology

This paper is a first‐hand summary on our comprehensive live trial of cellular‐assisted device‐to‐device (D2D) communications currently being ratified by the standards community for next‐generation mobile broadband networks. In our test implementation, we employ a full‐featured 3GPP LTE network deployment and augment it with all necessary support to provide real‐time D2D connectivity over emerging Wi‐Fi‐Direct (WFD) technology. As a result, our LTE‐assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real‐world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE‐assisted WFD solutions and associated operational ranges.     

Enhanced Vertical Charge Transport in a Semiconducting P3HT Thin Film on Single Layer Graphene

The crystallization and electrical characterization of the semiconducting polymer poly(3‐hexylthiophene) (P3HT) on a single layer graphene sheet is reported. Grazing incidence X‐ray diffraction revealed that P3HT crystallizes with a mixture of face‐on and edge‐on lamellar orientations on graphene compared to mainly edge‐on on a silicon substrate. Moreover, whereas ultrathin (10 nm) P3HT films form well oriented face‐on and edge‐on lamellae, thicker (50 nm) films form a mosaic of lamellae oriented at different angles from the graphene substrate. This mosaic of crystallites with π–π stacking oriented homogeneously at various angles inside the film favors the creation of a continuous pathway of interconnected crystallites, and results in a strong enhancement in vertical charge transport and charge carrier mobility in the thicker P3HT film. These results provide a better understanding of polythiophene crystallization on graphene, and should help the design of more efficient graphene based organic devices by control of the crystallinity of the semiconducting film.     

Bioinspired Magnetite Crystallization Directed by Random Copolypeptides

Control over magnetite (Fe₃O₄) formation is difficult to achieve in synthetic systems without using non‐aqueous media and high temperatures. In contrast, Nature employs often intrinsically disordered proteins to tightly tailor the size, shape, purity, and organization of the nanocrystals to optimize their magnetic properties. Inspired by such “flexible polyelectrolytes,” here random copolypeptides having different amino acid compositions are used as control agents in the bioinspired coprecipitation of magnetite through a ferrihydrite precursor, following a recently developed mineralization protocol. Importantly, the copolypeptide library is designed such that the amino acid composition can be optimized to simultaneously direct the size of the nanoparticles as well as their dispersibility in aqueous media in a one‐pot manner. Acidic amino acids are demonstrated to regulate the crystal size by delaying nucleation and reducing growth. Their relative content thus can be balanced to tune between the superparamagnetic and ferrimagnetic regimes, and high contents of negatively charged amino acids result in colloidal stabilization of superparamagnetic nanoparticles at high pH. Conversely, with positively charged lysine‐rich copolypeptides ferrimagnetic crystals are obtained which are stabilized at neutral pH and self‐organize in chains, as visualized by cryo‐transmission electron microscopy. Altogether, the presented findings give important insights for the future development of additive‐mediated nanomaterial syntheses.     

High Performance Three‐Dimensional Chemical Sensor Platform Using Reduced Graphene Oxide Formed on High Aspect‐Ratio Micro‐Pillars

The sensing performance of chemical sensors can be achieved not only by modification or hybridization of sensing materials but also through new design in device geometry. The performance of a chemical sensing device can be enhenced from a simple three‐dimensional (3D) chemiresistor‐based gas sensor platform with an increased surface area by forming networked, self‐assembled reduced graphene oxide (R‐GO) nanosheets on 3D SU8 micro‐pillar arrays. The 3D R‐GO sensor is highly responsive to low concentration of ammonia (NH₃) and nitrogen dioxide (NO₂) diluted in dry air at room temperature. Compared to the two‐dimensional planar R‐GO sensor structure, as the result of the increase in sensing area and interaction cross‐section of R‐GO on the same device area, the 3D R‐GO gas sensors show improved sensing performance with faster response (about 2%/s exposure), higher sensitivity, and even a possibly lower limit of detection towards NH₃ at room temperature.     

Metal salt modified PEDOT:PSS as anode buffer layer and its effect on power conversion efficiency of organic solar cells

The effects of metal chlorides such as LiCl, NaCl, CdCl₂ and CuCl₂ on optical transmittance, electrical conductivity as well as morphology of PEDOT:PSS films have been investigated. Transmittance spectra of spun PEDOT:PSS layers were improved by more than 6% to a maximum of 94% in LiCl doped PEDOT:PSS film. The surface of the PEDOT:PSS films has exhibited higher roughness associated with an increase in the electrical conductivity after doping with metal salts. The improvement in the physical properties of PEDOT:PSS as the hole transport layer proved to be key factors towards enhancing the P3HT:PCBM bulk heterojunction (BHJ) solar cells. These improvements include significantly improved power conversion efficiency with values as high as 6.82% associated with high fill factor (61%) and larger short circuit current density (∼18 mA cm⁻²).     

3D Printed Anatomical Nerve Regeneration Pathways

A 3D printing methodology for the design, optimization, and fabrication of a custom nerve repair technology for the regeneration of complex peripheral nerve injuries containing bifurcating sensory and motor nerve pathways is introduced. The custom scaffolds are deterministically fabricated via a microextrusion printing principle using 3D models, which are reverse engineered from patient anatomies by 3D scanning. The bifurcating pathways are augmented with 3D printed biomimetic physical cues (microgrooves) and path‐specific biochemical cues (spatially controlled multicomponent gradients). In vitro studies reveal that 3D printed physical and biochemical cues provide axonal guidance and chemotractant/chemokinetic functionality. In vivo studies examining the regeneration of bifurcated injuries across a 10 mm complex nerve gap in rats showed that the 3D printed scaffolds achieved successful regeneration of complex nerve injuries, resulting in enhanced functional return of the regenerated nerve. This approach suggests the potential of 3D printing toward advancing tissue regeneration in terms of: (1) the customization of scaffold geometries to match inherent tissue anatomies; (2) the integration of biomanufacturing approaches with computational modeling for design, analysis, and optimization; and (3) the enhancement of device properties with spatially controlled physical and biochemical functionalities, all enabled by the same 3D printing process.     

Electrochemical and Top‐Down 3D Ion‐Carving to Change Magnetic Properties

It is challenging to develop new top‐down approaches to tailor particles into subnanometer size structures on a large scale to further reveal their structure‐dependent physicochemical properties. Here, we demonstrate a non‐conventional, electrochemical, 3D ion‐carving process to tailor particles into subscale flower‐like nanostructures at room temperature. The technology is based on the electrochemical insertion/extraction of lithium ions as a carving “knife” to carve the single‐crystalline particle precursor into higher‐order, flower‐like nanostructures with hexagonal nanopetals as the building units. Our study demonstrates that the morphology of the as‐carved, flower‐like nanostructures can be controlled by the electrochemical parameters, such as the current density and the number of cycles. Particularly interesting is that dramatically different magnetic properties can be achieved depending on the morphology through careful tuning by the electrochemical ion‐carving process. The as‐carved, flower‐like particles may find many important applications, including magnetic nanodevices. Our approach, in principle, is applicable to prepare various kinds of 3D‐structured materials with different compositions.     

Smart Hybrids of Zn2GeO4 Nanoparticles and Ultrathin g‐C3N4 Layers: Synergistic Lithium Storage and Excellent Electrochemical Performance

Smart hybrids of Zn₂GeO₄ nanoparticles and ultrathin g‐C₃N₄ layers (Zn₂GeO₄/g‐C₃N₄ hybrids) are realized by a facile solution approach, where g‐C₃N₄ layers act as an effective substrate for the nucleation and subsequent in situ growth of Zn₂GeO₄ nanoparticles. A synergistic effect is demonstrated on the two building blocks of Zn₂GeO₄/g‐C₃N₄ hybrids for lithium storage: Zn₂GeO₄ nanoparticles contribute high capacity and serve as spacers to isolate the ultrathin g‐C₃N₄ layers from restacking, resulting in expanded interlayer and exposed vacancies with doubly bonded nitrogen for extra Li‐ion storage and diffusion pathway; 2D g‐C₃N₄ layers, in turn, minimize the strain of particles expansion and prevent the formation of unstable solid electrolyte interphase, leading to highly reversible lithium storage. Benefiting from the remarkable synergy, the Zn₂GeO₄/g‐C₃N₄ hybrids exhibit highly reversible capacity of 1370 mA h g^?1 at 200 mA g^?1 after 140 cycles and excellent rate capability of 950 mA h g^?1 at 2000 mA g^?1. The synergistic effect originating from the hybrids brings out excellent electrochemical performance, and thus casts new light on the development of high‐energy and high‐power anode materials.